Walther Rotex RM8 Regulator Upgraded Design 45J V2

Product Code: PCPSWRRM8RUD45JV2
Availability: In Stock
Price: ₹13,500.00
Qty:     - OR -   Add to Wish List
Add to Compare
Ask a Question about Walther Rotex RM8 Regulator Upgraded Design 45J V2

Walther Rotex RM8 Regulator Upgraded Design 45J V2

The Custom High Power 45J Reg for "Walther Rotex RM8 " is finally here.
Based on the request from our customers for more power on the Walther Rotex we now have it for you.
Features a more robust internal design.
Maintenance is way easier than before if you ever need to change the O rings in the future.
This regulator is all you need to get the Walther Rotex RM8 to extreme higher power. (45J)
Will outlast the factory regulator and easy to work upon if you ever need to change the O rings.
No Assembly or machining skills required.
Just unscrew the existing regulator and replace the factory reg to our high-powered reg.
This will not fail you, as the internals are a complete upgrade from the factory regulator, and we can assure you of its performance.
Replacing O rings is now a breeze for maintenance, and you do not have to worry about not being able to fix the regulator.

IMPORTANT NOTE: Once you have upgraded to this reg, you shall not be able to use the factory buddy bottle (200cc) and the fill port/gauge through the stock.
This is a longer reg, with more plenum for more power. The fill and the gauge port will no more line up with the recess in the stock.
You remove the factory regulator, the block which has the gauge and the fill nipple port and the 200cc buddy bottle.

Once removed you install our “Walther Rotex RM8 Regulator Upgraded Design 45J V2” Reg.
The air source for the reg is the standard cylinder which ships with walther dominator 1250 or the Diana P1000 (Either of the air tubes will screw onto this regulator)
If you do not have a spare cylinder from the walther dominator 1250 or the Diana P1000 then we do have the quick fill cylinder for your airgun which can then be used across the 3 airguns after the upgrade to this regulator.
"Walther Dominator 1250 Air Tube / Cylinder with Quick Fill adapter"

Do note the reg is unique to the walther rotex rm8 but the below cylinder can be used on all 3 airguns:
Walther Rotex RM8
Walther Dominator 1250
Diana P1000

These kit were designed for those who wanted to upgrade to extreme high power.
Also good for those who are having a hard time repairing their existing brass valves/ regulators for leaks or performance issues.
Be rest assured about the quality as they have been machined on CNC machines and each regulators are put to tests before being shipped.

Models: Works on both the .177 and .22 cal Walther Rotex airguns.

Contact us if you need any customization and we shall be happy to get it done for you.

If you have any further query about the listed product you can use the above link to “Ask a Question”

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Phone +91 9819249048.
Copyright © 2020 PCP Shop. All Rights Reserved.