Have been working upon this for the last couple of months and we have an even more robust internal design.
Maintenance is way easier than before if you ever need to change the O rings in the future.
This regulator is all you need to get that dominator 1250 up and running if you have a leaking valve or regulator which does not function the way it should.
Will outlast the factory regulator and easy to work upon for repairs.
No Assembly or machining skills required. Just unscrew the existing regulator and replace with ours.
This will not fail you, as the internals are a complete upgrade from the factory regulator, and we can assure you of its performance.
Replacing O rings is now a breeze for maintenance, and you do not have to worry about not being able to fix the regulator.
No changing factory springs or any other upgrades.
All tests were performed with standard walther dominator 1250
You can expect the following results from the respective kits.
Caliber: 4.50mm = 30-35 Joules
Caliber: 5,50mm = 45 to 50 Joules
Caliber: 6.35mm = 55 to 60 Joules
The kit comprises off the following:
a) Completely Assembled and Tested Brass Valve Regulator
b) Valve Guide Delrin Cap
c) Instructions Video and Manual
These were designed for those who wanted to upgrade to higher power.
Also good for those who are having a hard time repairing their existing brass valves/ regulators for leaks or performance issues.
Be rest assured about the quality as they have been machined on CNC machines and each regulators are put to tests before being shipped.
Body Length: 10.5 cm.
BE SURE TO READ THE DOC FOR INSTALLATION WHICH IS SENT ON EMAIL BEFORE YOU BEGIN THE UPGRADES.
Contact us if you need any customization and we shall be happy to get it done for you.
If you have any further query about the listed product you can use the above link to “Ask a Question”