Huma-Air tuning regulator Gen 3 for the FX impact & FX Crown air rifle as replacement for the factory regulator with a 16 mm piston and 10 mm Belleville springs.
This FX Impact or FX Crown Gen3 Regulator by Huma-Air is specially designed as a"one on one" replacement regulator for your FX Impact , FX Impact X or FX crown.
Unfortunately the fixed limited space in the FX Impact and Crown action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX.
Nevertheless, we have accomplished to make a great replacement regulator what will solve the know issues of the factory regulator.
This is the Gen3 model what is compatible with factory models with 16mm long pistons and 10mm Belleville disk springs.
So, what can you expect of the Huma-Air FX Impact or FX Crown Tuning Regulator:
The output performance of the Huma-Air Impact or Crown regulator won't be very different compared to a good functioning FX factory regulator, but we have some other benefits available.
The recovery time in between shots is much faster compared to the factory regulator.
This Huma-Air FX impact or Crown regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve gets damaged.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
The design of the regulator makes it possible for setting it exactly to your wishes while placed in you FX impact or FX Crown by watching the output pressure gauge on you rifle.
We have currently three pressure ranges for the FX Impact or FX Crown Gen3 regulator available:
The High Pressure range, 100-165 Bar, what will suit all calibre’s within the normal FAC range.
The Extra High Pressure range, 145-190 Bar for more extreme purposes and very good for the slugs and heavy pellets.
A low pressure ranges what will suit the sub 12 ft/lbs versions perfectly.
Please note: you need to do the stacking of the Belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.
When you order your FX Impact or FX Crown Gen 3 regulator you will receive:
Your regulator with the Belleville springs, matching the pressure range you choose.
A set of spare valve disks.
We will also include a “Huma-Air regulated” breech sticker.
Fitting instruction as pdf download.
Huma-Air Quality Control:
Huma regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy.
This gives our regulators a repeat cycle less than 1% difference.
Gen 1: Factory regulator with a 14 mm long polymere piston and 8 mm diameter belleville springs.
Gen 2: Factory regulator with a 16 mm long polymere piston and 8 mm diameter belleville springs.
Gen 3: Factory regulator with a 16 mm long polymere piston and 10 mm diameter belleville springs.
Gen 3 regulator, Low pressure range, 16 mm long piston, total 12 single stacked springs (G3/0,5)
Gen 3 regulator, High pressure range, 16 mm long piston, 6 sets of total 12 springs (G3/0.4)
Gen 3 regulator, Extra High-pressure range, 16 mm long piston, total 9 single stacked springs. (G3/0,6)
Detailed Fitting Instructions: Refer the correct model you have purchased from the below link.
Contact us if you need any customization and we shall be happy to get it done for you.
If you have any further query about the listed product you can use the above link to “Ask a Question”