Huma Benjamin Marauder Tuning Regulator With Pressure Gauge Connection

Product Code: PCPSHBMTRPGC1
Availability: In Stock
Price: ₹10,500.00
Qty:     - OR -   Add to Wish List
Add to Compare
Ask a Question about Huma Benjamin Marauder Tuning Regulator With Pressure Gauge Connection

Huma Benjamin Marauder Tuning Regulator With Pressure Gauge Connection

Benjamin Marauder Tuning Regulator
For the Benjamin Marauder we have a tuning regulator with a combined pressure gauge connection that can be pushed into the pressure tube. It will give your Benjamin Marauder a better shot count and a full flat shot string immediately. 
The pressure gauge can be screwed inside the regulator body and will indicate the regulated pressure.

The benefits of the Benjamin Marauder regulator made by Huma:
Higher accuracy of your air rifle due to the elimination of the pellet speed fluctuations.
A constant pellet speed over the full working pressure range.
Maximum use of the air volume due to our ultra-compact build.
It will give you a better shot count and a full flat shot string immediately.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage

Pressure settings of the Regulator:
The regulators come in the standard middle pressure range (MP: 70-150 bar output).
They come pre-set on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can easily re-adjust or fine tune the pressure setting suitable to your wishes.

When you order one of our regulators you will receive:
Your regulator pre-set on to your own wishes.
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma regulated” breech sticker.
Fitting instructions as pdf download.

Huma-Air Quality Control:
Huma regulators are CNC produced out of high-grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy. 
This gives our regulators a repeat cycle less than 1% difference.

Contact us if you need any customization and we shall be happy to get it done for you.

If you have any further query about the listed product you can use the above link to “Ask a Question”

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Phone +91 9819249048.
Copyright © 2020