Introducing one of its kind "Heavy Duty Portable Compressor rated 300 bar with Auto Shut Off."
Now you need not worry about not having a source to fill your PCP's anymore.
This heavy-duty compressor will fill any PCP in less than 5 minutes and auto cut off when it reaches the pre-set pressure. (Must be set manually)
Always remember to check the max pressure on your pcp before filling with the compressor.
The max working pressure will be stamped on the tank of your pcp, if you do not find it stamped or printed on the pcp, make sure to check your user manual for the same.
Never start the compressor without making sure of the max working pressure on the pcp.
Be advised you are dealing with high air pressure and safety is of paramount importance.
No need of any industrial power supply for powering this unit.
Works on single phase 230V with a 16 Amps socket.
Faster and efficient fills with dual mode water cooled system.
Lower maintenance and portable design without compromising on speed and efficiency.
Has an auto cut off feature so u can be rest assured about the max fill this compressor will fill to.
This compressor can fill from a range of 0 to 300 bar which is 0 to 4351 psi.
Be sure about the max pressure you can fill in bar or psi by checking manual or pcp and set the auto cut off to the desired pressure.
Do not confuse yourself with bar and psi to be the same.
If the reading on the pcp is mentioned in bar, then set to bar and if its mentioned in psi then set to psi.
Reading is bar is much lower than pcp and if you set it the wrong way, you will end up with a busted pcp.
Ships with quick coupler and 3 feet longer hose to get you started right out of the box.
No need for additional fittings.
Just in case your pcp comes with the male filling probe with 1/8 bsp thraeds, remember to order the “Male Quick-Disconnect 1/8”.
Have any queries and you can reach out to us.
We shall be happy to assist.
Ships with spares for any future maintenance requirements, backed by our support for help needed with this heavy-duty compressor.
Don't be fooled by the size, it's weighs about 28 kgs and is very sturdy built with a heavy-duty protective guard for carry and to protect the internals of the compressor.
Dimensions of the compressor are 17.1 in X 15 in X 15 in
MUST READ THE MANUAL AND FOLOW INSTRUCTIONS PROPERLY BEFORE FILLING.
ITS VERY IMPORTANT TO FOLLOW SAFETY PRECAUTIONS WHILE FILLING HIGH COMPPRESSED AIR.
MUST BE HANDLED OR SUPERVISED BY AN ADULT AT ALL TIMES WHILE BEING OPERATED.
Filling and Care Instruction:
Max capacity tank the compressor is recommended to fill is 2Ltr (2000cc tank)
Do not fill Larger Tanks with these compressors.
Do not let the compressor rise beyond its recommended temperature of 80 degrees Celsius and you must never run the compressor beyond 15 minutes.
Let the compressor cool off and start again.
Follow the instructions carefully when stopping and starting the compressor when filling scuba tanks up to 2Ltr or 2000cc.
Packaging and Shipping:
We test each compressor before dispatch. Additional to the factory wooden box we double pack it with a second layer of sturdier wooden box to protect it in transit.
Weight of the compressor is approx. 28 kgs. Standard wooden box the compressor comes weighs 3 kgs and the final heavy outer wooden box to protect in transit weights about 10 kgs.
So, all in all the shipping weight is above 40 kgs. It is a very critical the compressor reaches our customers in perfect condition and so we have taken these precautions.
Contact us if you need any customization and we shall be happy to get it done for you.
If you have any further query about the listed product you can use the above link to “Ask a Question”